Pig/Dog/Horse/Cattle Used Ultrasound & Full Digital Vet Palm Ultrasound Scanner
Check Before Starting
Before starting, pls check the following item
| NO | Item | Inspection |
| 1 | Power supply in line with standard single-phase three-wire power(AC220V±22V or AC110V±11V ) | Test |
| 2 | Probes and connectors must not be damaged, scratched and shedding; joints no loose connections, no cracks in the shell | Visual inspection |
| 3 | power line. Ensure no anomalies(such as scratch and crack) | Visual inspection |
| 4 | Cleaning and disinfection of the probe | Visual inspection |
| 5 | Systems and peripheral equipment can not be deformed, destroyed or with stains and other phenomena | Visual inspection |
| 6 | Debris is not placed on the control panel | Visual inspection |
| 7 | tempreture,humidity and pressure should meet with requirements | Tempreture/humidity inspection |
| 8 | clean venues and environment | Visual inspection |
| 9 | There must be no obstructions in the vicinity of the device | Visual inspection |
| 10 | Condensation can not occur | Visual inspection |
| 11 | Control panel, display and casing, to ensure that no anomalies (such as cracks) | Visual inspection |
| 12 | Check the Local auxiliary power outlet and all I / O ports to ensure that no anomalies (such as damage or foreign material clogging) | Visual inspection |
Power Examination
Should always check the instrument power supply, when the supply voltage exceeds the specified range of adaptation instrument (AC220V ± 22V, 50Hz ± 1Hz), there shall be booted
Always check the power cord and the instrument probe cable, if found damaged, breakage, should be replaced immediately.
After the boot panel cooling fan should check whether the normal operation should be stopped if found shutdown process.
Open Power Supply
1) Open power supply, allow the device to complete the boot menu and the image will appear.
2) Check whether the probe surface when using abnormal heat
 warning:Use abnormal heat may burn the patient probe |
| Attention :When you start the system or switch probe, may hear "crackling" sound, which is a normal phenomenon. |
3) Complete the following steps:
Check image,ensure there are no any non-normal situation
Check the control panel, make sure buttons and knobs work properly.
You should also check the following items are normal:
| NO | Item | inspection |
| 1 | There must be no abnormal sound, smell or overheating | Visual inspection, hear |
| 2 | No error message is displayed | Visual inspection |
| 3 | Abnormal noise may not be obvious, without the presence of black or continuously displayed on the B-mode image area. | Visual inspection |
| 4 | Acoustic lens surface probe must not overheat (hand-checked) | Touch feeling |
| 5 | Function keys on the keyboard is normal | operation |
| 6 | No black line screen images without interference | Visual inspection |
| warning:If you find any abnormality, indicating that the machine is defective. Should be shut down immediately and contact the marketing department, service department or agency. |
4.4 Diagnosis
Put gel on veterinary’s parts, and make the probe touch examination organs. In this case the screen section image will be displayed on the screen. If changing the direction and inclination of the probe can observe different images section , select the desired image section , as a basis for diagnosis. In the meantime, if the image's brightness , contrast and gain inappropriate , you can adjust the brightness of the monitor repeatedly , contrast, or adjust the signal gain until you get a clear picture.
Reboot Instrument
When an exception occurs appear following situations , you can switch off / on the way to restart the system :
1) The screen displays an error message, further more, the message is always displayed ;
2 ) display abnormal ;
3 ) the system is not operating properly .
Power off
1) be sure to turn the unit off when don’t use machine. Before turning off the power, you should follow these steps:
2) probe should be put in the corresponding probe cup sleeve.
3) according to the operation manual request to close all of the power device.
Warning: In order to ensure the safe and effective operation, it should routine maintenance and inspection. Please perform the following examination before each start. Upon checking into the abnormal situation, immediately shut down the system and contact our company marketing department, service department or dealer. If you use the non-normal system will hurt patient and equipment.
Product Tags:
|
|
Pig / Dog / Horse Veterinary Ultrasound Scanner Full Digital M Display Format Images
|
